There are currently no product reviews.
;
VERY NICE FOR COURTESY AND PRECISION!.
tHE SITE IS VERY IMPORTANT FOR ALL DEVICES
vERY GOOD
;
+++ Is is fine, that was what i looking for. Thanks! +++
;
A very good complete archive, i am very satisfied for document.
;
The Service Manual received was helpful. The electronic information is exactly what I needed.
;
The Manual was perfect.
The deliverie was perfect.
Thanks
VAA59004-R.3687.A
Making of the lens barrel drive tool � Perform disassembly to D5 in the repair manual. � Remove the monitor holder and �x the monitor as shown in Fig. 1.
To prevent the LCD monitor from contacting with the main PCB, process the cardboard and adhere it with the insulation tape.
Fig.1
� Charging starts when the power is ON. So, be sure to cover the solders of the SB wires and the condenser terminal with the insulation tape.
�Set the FPC of the lens unit, which is to be inspected, to the connector.
� Check the lens barrel operation by the W-T button. � Check the barrier operation by turning on/off the power. � Set the zoom position to the "T" side and release the shutter, then check the shutter operation.
- A5 ï½¥ L3 -
|