|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
VAA42003-R.3672.A Barrier unit
� Turn the rotor plate (#632) in the direction of the arrow so that clearance (0.5mm � 1mm) can be left at "B" part. � Pinch the self-made tool #632 into the clearance.� � By using the barrier-releasing self-made tool, open the barrier unit (#B631). � Hold the barrier unit (#B631) with the mark upwards, and hook it on two parts of the 1st lens-G tube to assemble them.
Barrier-releasing self-made tool (ref.) Length 15mm Diameter 7mm
�Leave the barrier open. Mark of #B631
ï¼¢
#632 Self-made tool (ref.) The CCD washer of E8400 is used by reducing the thickness #632
1st lensgroup hook
by 0.2 mm.
1st lensgroup tube
- A8・L� -
|
|
|
> |
|