NIKON F4
Service Manual

I

FAA23051-R.3248.A

You have the option to either leave the film leader in the camera or not by rewriting the data on the EEPROM memory chip. If you select to leave film leader, the film rewind motor stops immediately after the film detection switch turns from OFF to ON. Film leader leaves when rewinding film when the frame counter shows less than 1 (frame counter switch is ON) disregarding EPROM data. If you turn film rewind lever (R2) alone, an LED indicator (alert LED) blinks and alert at 8Hz.

(7) Shooting speed (Average values when using 36-exposure with fresh batteries and the shutter speed of 1/250 sec. or faster at room temperature (20°C) .

AF-c MF � b

MB-20 MB-21 MB-20 MB-21

CH 4.0 5.7 4.0 5.7

(frame/sec.) CL Cs 3.3 0.8 3.4 2.2 2.9 1.0 0.8 1.0

Shooting speed is not definite when setting in AF-S mode.

�M18�