|
Who's Online
There currently are 5963 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
INC
10-2. 1.5-m Adjustment VAA18001-R.3622.A � For 1.5-m adjustment, it is necessary to (re)write the adjustment firmware, so before the adjustment, be sure to (re)write the firmware. Also, after completing the adjustment, do NOT forget to restore the original product firmware. Procedure for setting Adjustment firmware 1) Save the adjustment firmware and the product firmware in any folder. 2) Start up "DscCalDi130a" and click on "Firmware" button on the main menu to write the adjustment firmware. (If the camera is activated after completing writing the adjustment firmware, "SERVICE" is indicated in red letters on LCD panel.) 3) Follow the instructions of the below [How-to]. 4) Start "DscCalDi130a" and click "Firmware" on the main menu to write the product firmware. [Preparations] � Set the Siemens star chart. � Turn the power switch of the camera to on. [Conditions] � The siemens star chart should be A3-size or larger (Copy and enlarge A4-size siemens chart included in the service manual for the usage.) � Illumination over the object should be 400 lux ± 10% � Set the siemens star chart and the camera (front surface of lens) at 150 cm ± 3 cm distance between them. [How-to] � Double click on "DscCalDi130a". � Set the siemens star chart so that it comes center of the screen by checking through the viewfinder. � Click "Focus" then "Yes". � Lens adjustment values will appear on the screen. Judgment standard: xd0=0 ± 50, xd4 = 0 ± 50, xd8 = 0 ± 50, xd13= 0 ± 50 xd19 = 0 ± 50 � Click "OK".
"Yes"
Camera ���
150cm±3cm
Siemens star chart �����
�������
Result of adjustment
- A18 ï½¥ E3700 -
|
|
|
> |
|