|
|
|
Who's Online
There currently are 6029 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent printing quality. A complete and very useful manual with all details.
;
Even if the PDF is a scan, I can read the information I need.
The price is affordable and the service (mail sending) is very fast.
Thanks ! Regards. William (Fan of Kenwood)
;
Very good quality original datasheet!I like this amazing website!!!!!!
 ;
Excellent just what I needed to replace the electrolytic caps and make this old gem a beauty again. Was as scan of the original photocopied service manual.
;
It was helpful to get schematic with waveforms in important points and lot of service information. Manual is good quality, fast delivered. Of course it is hardcopy of paper one with all its disadvantages.
INC
INSPECTION OF ENCODER SIGNAL
JAA76251-R.3414.A
� Use an F70(N70) camera body and AF nikkor lens inspection program for F70/N70 to display encoder signal on the computer monitor when making an inspection. Inspection method �Start the AF nikkor lens inspection program for F70/N70 and select "1.READING OF LENS ENCODER SIGNAL". Make inspection according to instructions as shown on the display. �Encoder signals should be as described in the table below when the zoom and distance scale are set to specified positions. � Encodr signal for CPU Version 0.1.1 �MF MODE Zoom ring f = 80mm f = 105mm f = 135mm f = 200mm � (Additioanl)
Distance scale position Infinity position 2.5m Most close distance position 1 72h 2 49h 3 63h 1 72h 2 68h
Encoder signal 3 63h 1 72h 2 41h 3 63h 1 72h 57h 36h 2 6Bh 6Bh 6Bh 3 63h 63h 63h
�AF MODE Zoom ring Distance scale position Infinity position 1 72h 2 49h 3 63h 1 2 f = 80mm f = 105mm f = 135mm f = 200mm
Encoder signal 3 1 2 3 1 2 3
� If encoder signal values are different from those shown in the table, following causes moust be considered.� Distance brush is mounted in the wrong position, distance brush or FPC is defective, encoder patterns on the FPC are contaminated, or the FPC is fixed in the wrong position.
Changed page
��� - L21�AF 80-200/2.8D -
June. 29. 2007
|
|
|
> |
|
