|
Who's Online
There currently are 5777 guests and 4 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
tres bon document
cela a permis de verifier la connection de l'ecran
merci
salutations
;
The manual was of good quality with high resolution schematic diagrams.
;
The manual was very clear and contained all the information I was looking for. My dishwasher is working again because of this servicemanual!
;
Quality scan, great manual. I solved my problem with this manual.
;
The AKAI 1720 model reel to reel tape recorder described in this Manual is quite an old unit - circa late 1960's. As a consequence, the description of the mechanical details - and adjustments thereof - is quite critical. The manual does this quite well. The schematics are also well presented and have detailed PCB overlays. Probably the only negative is that some half-tone detail has been lost from the original manual as it has been scanned in simple B&W.
INC
JAA79471-R.3678.A (4) Rear lens group alignment â� Mount the lens on the equipment (for center). (ref. â� of (2) for how to fit in it.) â�¡ Set the lens to WIDE-end. Put the zoom-fixing base, and rotate the zoom ring towards TELE until the lens touches the zoom-fixing base.
Zoom ring Zoom-fixing base
�� Adjust the cross lines by rotating the "LIGHT CONT." knob of "MEGALIGHT 100" and rotating the focus
ring from "infinity"-end so that the calibration of the cross lines can be seen clearly. Caution: Almost at WIDE-end, the edge of the lens touches the zoom-fixing base. However, rotate lightly the zoom ring further and the slightly changed the position of the cross lines must be standard.
Y-axis
X-axis
Focus ring
LIGHT CONT. knob
Cross lines Note) In case the cross lines are tilted, adjust them by turning the chart, which is screwed in the rear tube of the equipment.
�� Unlock the holder-moving lever, and move the holder down slowly by the lever. Caution: Move the holder down so that a load is not put on the lens body (especially the three rollers that support the 4th lens group). Also, adjust so that the cross lines remain unmoving, when the knobs of the micrometer (X and Y axes) are rotated and the holder is moved up and down.
- A44 ï½¥ AF-S VRDX18-200/3.5-5.6G -
|
|
|
> |
|